DHL – Duct Hi Limit RH% switch
- External knob adjustment.
- Temperature compensated humidity sensor.
- Set point range from 15 to 95%RH.
- Norm. open & Norm. closed contacts.
DAP – Duct air proving switch
- Knob adjustment.
- Set point range from 0.1 to 1.2in w.c. [20 to 300Pa].
- Supplied with pvc hose and 2 pitot tubes.
- Norm. open & Norm. close contacts (2A @ 250Vac or 1A @ 30Vdc).
RHS – Room humidity sensor
- Range from 0 to 100% RH.
- Signal 0-10Vdc.
- Power supply 15 to 28Vac or 15 to 36 Vdc.
- Response time lower than 10sec.
- Model RHS-D is provided with LCD display.
DHS – Duct humidity sensor
- Range from 0 to 100% RH.
- Signal 0-10Vdc.
- Power supply 15 to 28Vac or 15 to 36 Vdc.
- Response time lower than 10sec.
- Easy to adjust duct mounting bracket.
- Model DHS-D is provided with LCD display.
RHC – Room humidity controller
- Humidification & dehumidification sequences.
- 2 lines 8 characters LCD display
- Set point range from 10 to 90% RH.
- RH% sensor range from 20 to 100% RH.
- Signal 0-10Vdc.
- Power supply 19 to 30Vac (50-60Hz).
- PI time proportional algorithm.
FLS-24 – Floor leak switch
- FLS-24 will detect water on floor or other surface and will activate Relay, NO and NC contact.
- Norm. open & Norm. close contacts (1A @ 24Vac or Vdc).
- Power supply 11 to 27 Vac or Vdc.
- Adjustable gold plated probes.
- Weather resistant enclosure, rated IP55.
- Green LED as power indicator.
- Alarm red LED will illuminate if water is detected.
Location
steamOvap Inc
1490 Mazurette,
Montréal, Qc, H4N 1H2, Canada
Where to buy?
