steamOvap

Steam Distribution

SteamOsorb Multi-ramps

Request a quote

Use

Model steamOsorb is made of vertical tubes equipped with steam distribution nozzles. These nozzles are positioned perpendicular to the air flow; the tubes are connected to the header which is provided with a condensate return pipe and two feet. A top mounting bracket completes the assembly to maintain the vertical tubes and allow for easy installation of the SO in the ventilation duct or AHU. Each SOS steamOsorb is designed and adapted to fit inside ventilation duct and to meet the calculated non-wetting distance; header diameter will depend on maximum steam capacity; quantity of vertical tubes and quantity of nozzles will depend on steam capacity and non-wetting distance.

Specifications

SO steamOsorb distribution grid available with Header SO-H from 2 to 8in [DN50 to 200] and Vertical ramp SO-R in 1-1/2 or 2in [DN40 or 50].
Steam capacity range from 4 to 3300lb/h [2 to 1500kg/h].
Spacing configured as per duct width and required NWD, minimum 3in [76mm].
Available with thermal insulation (option E), frame with flanges (option FF), or frame for insertion (option FI).

SOE High efficiency steamOsorb

Request a quote

Use

SOE high efficiency steamOsorb is designed and adapted to fit inside ventilation duct and to meet the calculated non-wetting distance; header diameter will depend on maximum steam capacity; quantity of vertical tubes and quantity of nozzles will depend on steam capacity and non-wetting distance. Furthermore it is equipped with a unique very efficient and robust insulation materials in hollow sleeve with no longitudinal joint. It is covering all parts in contact with cold air. This thin thermal insulation is allowing to significantly increase efficiency by reducing condensate loss and air heat gain. It is a proven and affordable design. This modern high efficiency designs brings many benefits: Reducing wasted energy from steam condensation up to 80% which result in less energy required for same designed steam capacity; as well as reducing heat gain of air upon free cooling season which also is reducing the amount of cold outdoor dry air, allowing for a reduced humidification load, all the above means big saving of money for operation.

Specifications

SO steamOsorb distribution grid available with Header SO-H from 2 to 8in [DN50 to 200] and Vertical ramp SO-R in 1-1/2 or 2in [DN40 or 50].
Steam capacity range from 4 to 3300lb/h [2 to 1500kg/h].
Spacing configured as per duct width and required NWD, minimum 3in [76mm].
Available with thermal insulation (option E), frame with flanges (option FF), or frame for insertion (option FI).
Features thin insulation of 0.142in [3.6mm].
Rated for 500°F [260°C] continuous operation.
Highly resistant to molten metal, flames, abrasion, corrosive atmospheres, moisture, and chemicals.
Certified to ASTM E84 (equivalent to UL723).

SB - Space blower

Request a quote

Use

SB - Space blower allows for direct in-space steam distribution when no ventilation duct is present or for humidification at a very specific location. Space blower can be factory installed built-in on the IER or ISE humidifier or installed remotely from the humidifier. SB is robust and unique to the industry as the stainless steel steam distributor is thermally insulated in order to reduce condensate loss and optimize steam output. It also reduces temperature of all the internal components during operation increasing the life expectancy of the electrical motor fan.

Specifications

Model SBS features 1-1/2in [DN40] steam inlet diameter, 26lb/h [12kg/h] max capacity, and 9-1/4x7x9in [23x18x23cm] dimensions WxHxD.
Model SBM features 2in [DN50] steam inlet diameter, 65lb/h [29kg/h] max capacity, and 11-1/4x9x12in [29x23x30cm] dimensions WxHxD.
Model SBL features 2-1/2in [DN65] steam inlet diameter, 96lb/h [44kg/h] max capacity, and 11-1/4x9x12in [29x23x30cm] dimensions WxHxD.